10-Amp Charge Controller
10-AMP CHARGE CONTROLLER
Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 Watts and below, we recommend the 10-Amp Charge Controller. For solar charging with more than 100 Watts, we recommend the 20-Amp Charge Controller.
Charge Controller comes with an integrated 8mm Connector. To connect and charge a 12V battery, you must purchase the Spade to SAE Cable and additional cable adaptors. We recommend either the SAE to Ring Terminal or SAE to Alligator Clip.
Will not work with Yeti X Power Supply.
What's In the Box
10A Charge Controller
Spade to 8mm Cable
PORTS
Input/Output terminal: M5 terminals
Input Port: Solar Port: (blue, 8mm): 14-22.5V up to 10A
Fuse: 15A replaceable
GENERAL
Product SKU: 96100
Weight: 14.4 oz (408 g)
Dimensions: 6.10 x 3.90 x 1.02 in. (15.5 x 9.91 x 2.6 cm)
IP Grade: IP65
Spade to 8mm Cable Length: 3 ft
Operating temperature: -25 to 50°C/ -13 to 122°F
Warranty: 2 Years
Certs: IC, FCC, CE-EMC, CE-LVD
BATTERY DETAILS
Rated solar panel amps GZ-10: 10A
Normal input solar cell array voltage: 15-22V
Max solar cell array voltage (output has no load): 25V
Lowest operating voltage at solar or battery side: 8V Minimum
Charging Characteristics:
Start Voltage at 25°C: 3-10V
Charge Voltage at 25°C:
LTO battery: 14.0V
Gel battery: 14.1V
LiFePO4 battery: 14.4V
Charge Voltage at 25°C: AGM battery-14.4V
WET battery: 14.7V
Calcium battery: 14.9V
Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
Float Voltage at 25°C:
Gel, AGM, WET, Calcium batteries-13.6V
LTO and LiFePO4 batteries-13.4V
Battery temperature compensation coefficient: -24mV/°C
10-AMP CHARGE CONTROLLER
Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 Watts and below, we recommend the 10-Amp Charge Controller. For solar charging with more than 100 Watts, we recommend the 20-Amp Charge Controller.
Charge Controller comes with an integrated 8mm Connector. To connect and charge a 12V battery, you must purchase the Spade to SAE Cable and additional cable adaptors. We recommend either the SAE to Ring Terminal or SAE to Alligator Clip.
Will not work with Yeti X Power Supply.
What's In the Box
10A Charge Controller
Spade to 8mm Cable
PORTS
Input/Output terminal: M5 terminals
Input Port: Solar Port: (blue, 8mm): 14-22.5V up to 10A
Fuse: 15A replaceable
GENERAL
Product SKU: 96100
Weight: 14.4 oz (408 g)
Dimensions: 6.10 x 3.90 x 1.02 in. (15.5 x 9.91 x 2.6 cm)
IP Grade: IP65
Spade to 8mm Cable Length: 3 ft
Operating temperature: -25 to 50°C/ -13 to 122°F
Warranty: 2 Years
Certs: IC, FCC, CE-EMC, CE-LVD
BATTERY DETAILS
Rated solar panel amps GZ-10: 10A
Normal input solar cell array voltage: 15-22V
Max solar cell array voltage (output has no load): 25V
Lowest operating voltage at solar or battery side: 8V Minimum
Charging Characteristics:
Start Voltage at 25°C: 3-10V
Charge Voltage at 25°C:
LTO battery: 14.0V
Gel battery: 14.1V
LiFePO4 battery: 14.4V
Charge Voltage at 25°C: AGM battery-14.4V
WET battery: 14.7V
Calcium battery: 14.9V
Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
Float Voltage at 25°C:
Gel, AGM, WET, Calcium batteries-13.6V
LTO and LiFePO4 batteries-13.4V
Battery temperature compensation coefficient: -24mV/°C