Old Man Emu OME Medium Load Rear Leaf Pack [15+ Colorado Z71 & ZR2]
OverviewSKU: EL100RFeatures:1″ Rear Lift for stock weight trucksDraw Tapered & Diamond Cut Leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life.Bolt Clamps & Liners: The leaf clamps are bolted to allow installation of anti squeak nylon liners.Fully Scragged & Load Tested: Scragging ensures the spring takes a permanent ‘set’ which reduces the risk of sagging. Load testing ensures the spring meets the required specification.Graphite Coating: To further reduce the friction between the spring leaves & friction pads.Military Wrap: Designed to provide added safety.Anti Friction Pads: Regreasable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest.Flat Axle Seat Area: Allows a positive, safe axle mount reducing spring stress & increasing spring life.Shot Peening: The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.Two-stage Leaf Pack: Featured on most rear springs for optimum comfort. When unladen the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.Please note: Most Emu leaf springs have all the listed features, but where design or a physical limitation exists one or more of these features may not be incorporated.Includes:(1) Rear leaf pack (sold individually)Requires:(2) Leaf Spring Bushing Kit – OMESB116
OverviewSKU: EL100RFeatures:1″ Rear Lift for stock weight trucksDraw Tapered & Diamond Cut Leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life.Bolt Clamps & Liners: The leaf clamps are bolted to allow installation of anti squeak nylon liners.Fully Scragged & Load Tested: Scragging ensures the spring takes a permanent ‘set’ which reduces the risk of sagging. Load testing ensures the spring meets the required specification.Graphite Coating: To further reduce the friction between the spring leaves & friction pads.Military Wrap: Designed to provide added safety.Anti Friction Pads: Regreasable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest.Flat Axle Seat Area: Allows a positive, safe axle mount reducing spring stress & increasing spring life.Shot Peening: The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.Two-stage Leaf Pack: Featured on most rear springs for optimum comfort. When unladen the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.Please note: Most Emu leaf springs have all the listed features, but where design or a physical limitation exists one or more of these features may not be incorporated.Includes:(1) Rear leaf pack (sold individually)Requires:(2) Leaf Spring Bushing Kit – OMESB116