X-BULL Waterproof Electric Synthetic Rope Winch Kit - 13500 Lbs. Load Capacity

$399.90

From the brand

Product Description

13500 XPV winch

Size:13,500 Lb.- Synthetic Rope Winch

X-BULL 12V Synthetic Rope Electric Winch

Three-stage Planetary Gear System/Super Big Power,High Tensile Synthetic Cable/Power In & Power Out Motor for Positive Load Control/Braker for Maximum Safely

Free Spooling Clutch for Fast Wire Rope Payout/Heavy Duty Sealed Contactor/Wire/Wireless Remote Control Model for Easy Operation

  • Overall Dimensions(L X D X H):21.25″ X 6.3125″ X 10.125″ (540x160x257mm).
  • Mounting Pattern:10″ x 4.5″ (254mm)
  • Drum (Dia. X L):2.5″ X 9.6″ (64mm x 244mm)

If Motor stalls, stop winching immediately. Electric winches Pull only on parts of vehicle as specified by vehicle manufacturer applications. Keep duration of winching pulls as short as possible: Do not use for more than 1 minute when at or near rated load. If Motor becomes hot to touch, stop winching immediately. Allow Motor to cool before resuming.

  • Check tightness of all mounting hardware and electrical connections periodically.
  • Keep Winch clean. Remove all dirt and corrosion as required.
  • Do not disassemble Mechanical Gear System. High temperature lithium grease has been applied at the factory. No user maintenance is required.

Motor is powered by a 12 volt battery. When the winch is connected to the control box, make sure that the protective sleeves on the wires are in place. The wire must not touch any conductors to avoid short circuit

13500 winch

To pull out the rope, move the clutch handle to the released position, slide the loop of the hook strap over the hook,then pull on the hook to pull out the rope. Attention!：Leave at least five full turns of wire rope on the drum.

I only received the wired remote, the wired remote is missing.

Wired and wireless remote control is integrated.

Motor runs but Winch Drum does not turn

Free Spooling Clutch not engaged.

Motor does not turn on

Rocker Switch not connected properly/Loose battery cable connections./Defective Rocker Switch./Defective Motor./Solenoid sticking.

Motor overheating.

Winch run time too long.

Be Brave to Explore Outdoors

Current Time 0:00
Duration 0:45

Loaded: 29.12%

Stream Type LIVE
Remaining Time 0:45
1x
From the brand Product Description Size:13,500 Lb.- Synthetic Rope Winch X-BULL 12V Synthetic Rope Electric Winch Three-stage Planetary Gear System/Super Big Power,High Tensile Synthetic Cable/Power In & Power Out Motor for Positive...
Add to WishlistCompare

amazon paymentsamerican expressapple paybitcoingoogle payjcbmasterpaypalshopify paysofortvisa
Ask a Question
SKU: B0BBDXT1KL
Availability: In Stock Pre order Out of stock
Categories: Unavailable Amazon Products
Tags: marketplace
Description

From the brand

Product Description

13500 XPV winch

Size:13,500 Lb.- Synthetic Rope Winch

X-BULL 12V Synthetic Rope Electric Winch

Three-stage Planetary Gear System/Super Big Power,High Tensile Synthetic Cable/Power In & Power Out Motor for Positive Load Control/Braker for Maximum Safely

Free Spooling Clutch for Fast Wire Rope Payout/Heavy Duty Sealed Contactor/Wire/Wireless Remote Control Model for Easy Operation

  • Overall Dimensions(L X D X H):21.25″ X 6.3125″ X 10.125″ (540x160x257mm).
  • Mounting Pattern:10″ x 4.5″ (254mm)
  • Drum (Dia. X L):2.5″ X 9.6″ (64mm x 244mm)

If Motor stalls, stop winching immediately. Electric winches Pull only on parts of vehicle as specified by vehicle manufacturer applications. Keep duration of winching pulls as short as possible: Do not use for more than 1 minute when at or near rated load. If Motor becomes hot to touch, stop winching immediately. Allow Motor to cool before resuming.

  • Check tightness of all mounting hardware and electrical connections periodically.
  • Keep Winch clean. Remove all dirt and corrosion as required.
  • Do not disassemble Mechanical Gear System. High temperature lithium grease has been applied at the factory. No user maintenance is required.

Motor is powered by a 12 volt battery. When the winch is connected to the control box, make sure that the protective sleeves on the wires are in place. The wire must not touch any conductors to avoid short circuit

13500 winch

To pull out the rope, move the clutch handle to the released position, slide the loop of the hook strap over the hook,then pull on the hook to pull out the rope. Attention!：Leave at least five full turns of wire rope on the drum.

I only received the wired remote, the wired remote is missing.

Wired and wireless remote control is integrated.

Motor runs but Winch Drum does not turn

Free Spooling Clutch not engaged.

Motor does not turn on

Rocker Switch not connected properly/Loose battery cable connections./Defective Rocker Switch./Defective Motor./Solenoid sticking.

Motor overheating.

Winch run time too long.

Be Brave to Explore Outdoors

Current Time 0:00
Duration 0:45

Loaded: 29.12%

Stream Type LIVE
Remaining Time 0:45
1x
Reviews